Linee guida valutazione conformità Allegato II direttiva 2013/29/UE
Commissione Europea, 21 Dicembre 2017
Guideline for the practical application of the conformity assessment procedures (modules B, C2, D, E, G and H) according to Annex II of the Directive 2013/29/EU
Approved during the meeting in Vienna, 2017-11-22
This Document gives guidance on the practical application of the following conformity assessment procedures as set out in the Annex II of the Directive 2013/29/EU:
Module |
Application on categories |
B (EU-type examination) |
F1-F4, T1-T2, P1-P2 |
C2 (conformity to type) |
F1-F4, T1-T2, P1-P2 |
D (production quality assurance) |
F1-F4, T1-T2, P1-P2 |
E (product quality assurance) |
F1-F4, T1-T2, P1-P2 |
H (full quality assurance) |
F4 only |
Notified Bodies (NBs) under the Directive 2013/29/EU apply as a general guidance the harmonized principles as stated below.
Module granting order regarding modules B, C2, D, and E
As described in the relevant chapters of the Directive 2013/29/EU and the Guide to the implementation of directives based on the New Approach and the Global Approach (“blue guide”; chapter 5.1), type examination according to module B is a precondition of the modules C2, D, and E.
For modules G and H separate procedures are defined (see below).
Module B: EU-type examination
Module C2: Conformity to type based on internal production control plus supervised product checks at random intervals
Module D: Production quality assurance - procedure
Module E: Product quality assurance - procedure
Module G: Conformity based on unit verification - procedure
Module H: Full quality assurance - procedure
Fonte: Commissione Europea
Normativa correlata: