UNI EN ISO 16092-1:2018
Sicurezza delle macchine utensili - Presse - Parte 1: Requisiti generali di sicurezza
In allegato preview ISO 16092-1:2017 riservato abbonati
Data entrata in vigore: 19 luglio 2018
La norma specifica i requisiti tecnici di sicurezza e le misure che devono essere adottate dalle persone che si occupano della progettazione, produzione e fornitura di presse che sono destinate alla lavorazione a freddo di metallo o di materiale parzialmente metallico, ma che possono essere utilizzate allo stesso modo per lavorare altri materiali in fogli (ad es. cartone, plastica, gomma, cuoio, ecc.).
http://store.uni.com/catalogo/index.php/uni-en-iso-16092-1-2018.html
_____
Recepisce:
EN ISO 16092-1:2018
Adotta:
ISO 16092-1:2017
Sostituisce:
UNI EN 692:2009
UNI EN 13736:2009
UNI EN 693:2011
...
ISO 16092-1:2017
Machine tools safety -- Presses -- Part 1: General safety requirements
ISO 16092-1:2017 specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses which are intended to work cold metal or material partly of cold metal, but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.).
NOTE 1 The design of a machine includes the study of the machine itself, taking into account all phases of the "life" of the machine mentioned in ISO 12100:2010, 5.4, and the drafting of the instructions related to all the above phases. The requirements in this document take account of intended use, as defined in ISO 12100:2010, 3.23, as well as reasonably foreseeable misuse, as defined in ISO 12100:2010, 3.24. This document presumes access to the press from all directions, deals with all significant hazards during the various phases of the life of the machine described in Clause 4, and specifies the safety measures for both the operator and other exposed persons.
NOTE 2 All significant hazards means those identified or associated with presses at the time of the publication of this document. ISO 16092-1:2017 applies to presses which can function independently and can also be used as a guide for the design of presses which are intended to be integrated in a manufacturing system. The covered presses transmit force mechanically to cut, form, or work cold metal or other sheet materials by means of tools or dies attached to or operated by slides/ram in range in size from small high speed machines with a single operator producing small workpieces to large relatively slow speed machines with several operators and large workpieces.
ISO 16092-1:2017 does not cover machines whose principal designed purpose is:
a) metal cutting by guillotine;
b) attaching a fastener, e.g. riveting, stapling or stitching;
c) bending or folding by press brakes or folding machines;
d) straightening; e) turret punch pressing;
f) extruding;
g) drop forging or drop stamping;
h) compaction of metal powder;
i) single purpose punching machines designed exclusively for profiles, e.g. used in the construction industry;
j) spot welding;
k) tube bending; l) working by pneumatic hammer.
This document does not cover hazards related to the use of presses in explosive atmospheres.
ISO 16092-1:2017 covers the safety requirements related to the use of programmable electronic systems (PES) and programmable pneumatic systems (PPS).
ISO 16092-1:2017 is not applicable to presses which are manufactured before the date of its publication.
ISO 16092-1:2017 deals with the common significant hazards, hazardous situations and events relevant to presses and ancillary devices which are intended to work cold metal or material partly of cold metal (see Clause 4).
This document defines the common safety requirements for presses defined in this clause and shall be used in connection with other parts of the ISO 16092 series. Specific hazards which are related to the type presses used are dealt with in ISO 16092‑2, ISO 16092‑3 and ISO 16092‑4.
Info e download Preview EN ISO 16092-1
UNI EN ISO 16092-3:2018
Sicurezza delle macchine utensili - Presse - Parte 3: Requisiti di sicurezza per presse idrauliche
In allegato preview ISO 16092-3:2017 riservato abbonati
Data entrata in vigore: 19 luglio 2018
La norma, unitamente alla UNI EN ISO 16092-1, specifica i requisiti tecnici di sicurezza e le misure che devono essere adottate dalle persone che si occupano della progettazione, produzione e fornitura di presse idrauliche destinate a lavorare a freddo metallo o altro materiale in parte costituito da metallo.
Le presse coperte dalla norma variano per dimensioni: da macchine di dimensioni ridotte ad alta velocità con un solo operatore che producono piccoli pezzi di lavoro, a macchine di grandi dimensioni a velocità relativamente bassa con diversi operatori che producono pezzi di lavoro complessi di grandi dimensioni.
La norma si occupa di tutti i pericoli significativi pertinenti per le presse idrauliche quando utilizzate come previsto e nelle condizioni di uso improprio che sono ragionevolmente prevedibili dal fabbricante. Sono state prese in considerazione tutte le fasi del ciclo di vita della macchina come descritto nella UNI EN ISO 12100:2010, punto 5.4.
http://store.uni.com/catalogo/index.php/uni-en-iso-16092-3-2018.html
...
Recepisce:
EN ISO 16092-3:2018
Adotta:
ISO 16092-3:2017
Sostituisce:
UNI EN 693:2011
In allegato Preview EN ISO 16092-3:2018 riservato Abbonati
EN ISO 16092-3:2018
Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
This document is a “Type C” standard as stated in ISO 12100.
It is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety:
- machine manufacturers (small, medium and large enterprises);
- health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.).
Others can be affected by the level of machinery safety achieved by the above-mentioned stakeholder groups by means of this document:
- machine users/employers (small, medium and large enterprises);
- machine users/employees (e.g. trade unions, organizations for people with special needs);
- service providers, e.g. for maintenance (small, medium and large enterprises);
- consumers (in case of machinery intended for use by consumers).
The above-mentioned stakeholder groups have been given the possibility to participate in the drafting process of this document.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.
This document is intended to be applied in addition to ISO 16092-1.
Fonte: UNI http://store.uni.com/catalogo/index.php/uni-en-iso-16092-3-2018.html
Info e download Preview EN ISO 16092-3:2018
|
